One of the most time-consuming aspects to painting a car is you autobody surface preparation procedure. It can also be a bit labor intensive, but vital to reaching a professional paint job. While some courses gloss over this crucial step, the course at learnautobodyandpaint.com uses an excessive amount of time showing how to effectively do this. I was blessed to find this course as others I got did not get into enough detail, which brought me to botch my first few paint jobs. After rightly learning how to prepare the surface, my paint jobs came out excellent.
The first part of proper autobody surface preparation procedure requires you to remove any paint that is already on the vehicle. If it is already stripped, skip this. You have three choices when it comes to removing paint. There is hand sanding, media or sand blasting, and chemical removal. Hand sanding is the most labor intensive, but allows you to save some money as it is the cheapest method. Media blasting is faster but must be done carefully as it can be dangerous if done improperly. Chemical removal is another option but again this can be dangerous as you are using dangerous chemicals. Whichever method you choose, make sure to remove all paint on the surface.
The next part of proper autobody surface preparation procedure requires that you make sure to get the surface as smooth as possible. This can be done by using sand paper to smooth out all rough areas, scratches, and blemishes. You want to really get the surface immensely smooth as any rough spots will show right through your new coats of paint. After you smooth out the surface, it may be a good idea to wash the area off. You do not want any dust or debris on the surface prior to applying paint. This also makes it a good idea to paint in a nice clean environment.
You are almost ready to paint, your final step is to prime the area. This can be done by using paint primer onto the area to be painted. This can be bought at your local auto body and paint store. You could also find yourself employing a spray can with black paint as being a guide coat prior to painting. Just spray then sand the sprayed parts until the guide coat is eradicated.
You must now be ready to use your new coats of paint. For additional information on surface preparation and auto body painting, check out learnautobodyandpaint.com. While the course is not free, there is a bunch of complementary tips and tricks you could find in the blog section, the free eBook, or the customer testimonials.
The first part of proper autobody surface preparation procedure requires you to remove any paint that is already on the vehicle. If it is already stripped, skip this. You have three choices when it comes to removing paint. There is hand sanding, media or sand blasting, and chemical removal. Hand sanding is the most labor intensive, but allows you to save some money as it is the cheapest method. Media blasting is faster but must be done carefully as it can be dangerous if done improperly. Chemical removal is another option but again this can be dangerous as you are using dangerous chemicals. Whichever method you choose, make sure to remove all paint on the surface.
The next part of proper autobody surface preparation procedure requires that you make sure to get the surface as smooth as possible. This can be done by using sand paper to smooth out all rough areas, scratches, and blemishes. You want to really get the surface immensely smooth as any rough spots will show right through your new coats of paint. After you smooth out the surface, it may be a good idea to wash the area off. You do not want any dust or debris on the surface prior to applying paint. This also makes it a good idea to paint in a nice clean environment.
You are almost ready to paint, your final step is to prime the area. This can be done by using paint primer onto the area to be painted. This can be bought at your local auto body and paint store. You could also find yourself employing a spray can with black paint as being a guide coat prior to painting. Just spray then sand the sprayed parts until the guide coat is eradicated.
You must now be ready to use your new coats of paint. For additional information on surface preparation and auto body painting, check out learnautobodyandpaint.com. While the course is not free, there is a bunch of complementary tips and tricks you could find in the blog section, the free eBook, or the customer testimonials.
About the Author:
Learn more about autobody surface preparation procedure. Stop by Tony Bandalos's site www.learnautobodyandpaint.com where you can find out all about auto body and paint and what it can do for your auto body and paint.
